• 'It was making a loud noise': Pilot dies after plane crashes in Watauga Co.


    WATAUGA COUNTY, N.C. - Authorities have identified the pilot who was killed in a plane crash Wednesday morning in a wooded area of Watauga County.

    The crash happened just after 8:40 a.m. near Deep Gap on Hardin Road, about 10 miles northeast of Boone, according to officials.

    Deputies told Channel 9's Dave Faherty the pilot crawled from the wreckage and was found some distance away from the plane. Troopers identified him as 67-year-old Danny Dunn and said he suffered burns to more than 70% of his body.

    Dunn was then flown to Baptist Hospital. He later died.

    [ALSO READ: NTSB releases initial report on Rowan County plane crash that killed beloved pilot]

    The North Carolina Highway Patrol said Dunn had taken off from his small airstrip in front of his home Wednesday morning, which is a few hundred yards from where the plane went down and caught fire.

    Nearby neighbors said Dunn flew for about 10 minutes before the crash.

    “He just seemed like he went up and down, you know. He didn’t seem like he had good control of it,” said neighbor Bobby Seatz.

    Another neighbor said something didn’t seem right just from the sound of the plane.

    “It was making a loud noise. We thought it was a single prop. We were talking about it me and my cousin, man it sounded pretty loud and kind of abnormal,” said neighbor Treas Hanifan.

    Chopper 9 Skyzoom flew over the wooded area where the plane went down but the tree canopy was so dense, we could not see the wreckage from the air.

    >> Download the WSOCTV news app for your smartphone and get updates on breaking stories as they come in.

    Officials have not said what led to the crash, which is under investigation. The pilot was the only person on board.

    The Federal Aviation Administration is investigating the crash.

    No other information has been released. 

    This is an ongoing investigation. Check back with wsoctv.com for more information.

    Next Up: